Home shutter knowledge collection! the blinds of different product materials are selected.

Home shutter knowledge collection!

Blinds are a kind of window sash with wooden slats stacked diagonally into scales, which can open and close the wind and rain and light. wooden blindThere are three common types of blinds: plastic, aluminum alloy and wooden blinds. According to the different home development space learning environment of the enterprise, the blinds of different product materials are selected.

【 Introduction to Blinds 】

1. There are two kinds of blind installation method and bright installation method, window blindsand the purchase needs to measure the size of the blind according to different assembly methods. The dark color is installed in the lattice of the shutter, its length should be the same as the height of the window, and the width of the window should be less than about 1 to 2 centimeters.

2. Plastic blinds have good toughness, but poor gloss and brightness, venetian blindwhile plastic aluminum blinds are easy to change color, but not fade, not deformation, good insulation effect, high concealment. So when we choose the shutter, we can consider the material according to the environment. For example, dark and damp small rooms such as kitchens and bathrooms are more suitable for plastic shutters, and large rooms such as living rooms, bedrooms, and study rooms are more suitable for plastic and aluminum shutters, which are more delicious.

3. If shutters are used as floor-to-ceiling or divider Windows, how can they be cheaper to decorate? It is generally recommended to use folding blinds; If it is used as a small window in the kitchen and living room space, it is recommended to use the flat type; Generally in the bathroom for shading, you can choose push-pull shutters. This is the smartest way to choose according to different functions.

【 Purchase tips 】

1. Observe the overall color of the blinds.

The color to be observed mainly includes the use of louver blades, louver upper and lower rails and all other small accessories such as wire racks, rotating rods, drawwires, copper bells, etc., to maintain an overall design color consistency.

2. check the smoothness of the blade

The surface of the shutter blade and wire holder can be felt smooth by the touch of the hand, and the qualified shutter products are smooth and flat with no stinging feel.

3. Open and close the shutter, and test whether the opening and closing function of the shutter blade is normal.

Turn the rotating rod of the shutter to open the blade, and each blade should be maintained at a good level, that is, the distance between the blades is balanced, and each blade should be kept straight without the feeling of bending up and down. When the blades are closed, each blade should be consistent with each other, without light leakage gap.

4. check the deformation resistance

Open the blade of the rear shutter, push down the blade, let the stressed blade bend downward, and then quickly let go. If the blade can immediately return to the horizontal state without bending, it indicates that the shutter quality is qualified.

5. the detection system automatically locks the function

When the blade is fully closed, pull the cable and the blade can be rolled up. At this time, pull the wire to the right, the blade should be automatically locked, maintain the corresponding state of winding, neither continue to wind, nor loose slip. Otherwise, the locking function will have problems.

6. look at the accessories adjusting rod

The shutter adjusting rod has two functions, one is to adjust the shutter lifting switch, and the other is to adjust the Angle of the blade. When inspecting the adjusting rod, first hang the shutter flat, try to pull it to see whether the lifting switch is smooth, and then roll the adjusting rod to see whether the blade is equally flexible.

7. Check the quality of cable ties and cable trays

Although cables and wire racks are small accessories for shutters, if these small accessories are of poor quality and damaged during use, they will also affect the use of shutters, so the quality of these accessories should also be carefully checked when purchasing shutters.

8. Look at the way you open the window

There are many kinds of window opening design methods, such as fixed, flat open, push-pull theory, etc., according to students' own needs to choose Oh!.