How to choose materials for kitchen cabinet countertops, what are the characteristics of each material?

1. Solid wood

Cheap wood is soft and porous, while hardwood is slow growing and expensive. The wood used to make countertops is naturally harder, but due to the large size of the countertop itself, it would be really expensive to find such a large, complete solid wood slab. Jigsaw puzzles are a more affordable option - smaller pieces of wood glued together at a more reasonable price.

Wood is bound to crack, and when it does, it is found to hide dirt and grime, which is very difficult for us to clean, and the probability of a panel cracking is small, but it does not necessarily mean that it will never produce cracks. Wood is most likely to cause cracking when there are frequent changes in temperature and humidity environmental conditions. The biggest safety threat that can be used in a kitchen is an open fire by the stove. Either the person around the stove doesn't have solid wood,quartz benchtops or by changing your cooking habits by using a low to medium heat or just replacing your induction cooktop. In addition, when the table splashes water, you must need to wipe it off immediately to avoid flooding into our wood and contaminating the wood.

In addition, solid wood needs to be painted or waxed before use to better protect the surface of the wood. Frankly speaking, although real wood is beautiful, it still needs your careful care and cooking habits need to be adjusted.

2. Fireproof boards

If you want a good wood grain, another option is to choose fireproof board. Fireproof board is particle board, which has a better fireproof surface. With our board furniture is naturally not bad, so the price is not expensive. Don't believe the rumors out there that fireproof board has a short life.

Because any pattern you want can be made,quartz slabs so both wood grain and marbling can be imitated. Don't put hot things directly on the table. Always use a pan to protect the tabletop. Clean it daily by wiping it down with a soft cloth dipped in water and a neutral detergent or soap only.

To be clear, make sure you use a pan mat, wipe it down when it gets dirty, don't scrape it with something sharp, don't pour any sanitizer on it, and clean it diligently. If you are lazy, don't use fireproof board.

3. Natural stone

Finally we come to marble, granite because the pattern is not as good as marble, no marble fire. Like wood, the stone itself will crack, cracking problem research is very with universal.quartz vanity tops Although repair techniques can be used by continuing to carry out normal work, but must be very diaphragm.

Marble has many pores on the surface and dirt can easily penetrate, especially light-colored marble, which can easily be damaged by a glass of red wine. This natural material is not resistant to corrosion, and a cut lemon will spill a few drops of lemon juice, which will immediately splash on the table. If you want to make a dining table out of natural stone, in addition to sealing up the pores on the tabletop every year or two, you need to clean it very hard or you'll never get it off.

4. Stainless Steel

There's nothing to complain about with the materials used throughout the restaurant industry. Inexpensive (or food grade 304 stainless steel), easy to clean and durable. Sounds good. The only problem is that it is easy to spend, belonging to the kind of inexplicable flowers; stainless steel, the less easy to spend, the lower the color price, the stainless steel countertops steel plate is not thick, long-term heating will be deformed and bulging.

5. Artificial stone / acrylic

Solid color table, looks very fresh and simple, and can not be used wrong, and can be done exceptionally. Bonding aluminum powder with resin and adding some toner sounds simple, but aluminum powder is not cheap, so its performance is proportional to the price. The cheap ones have been replaced by calcium powder.

6. Artificial quartz stone

The principle of artificial should be time and artificial stone is the same, except that artificial stone is made of aluminum powder, should be time is natural quartzite crushed, combined with resin and become. Because quartzite is natural small crystals, not as big as marble in nature. Artificial quartz stone does have a balance of performance, value, and price compared to previous materials.

Quartz table itself has a very hard, not afraid of scratches, and we can also resist acid and alkaline oils, in a large number of other related materials table defects problems have been killed themselves before can be said directly over. Its only drawback is that the splicing is not possible to achieve seamless, there will be some traces of such, and although the market price is more expensive, it will not be too expensive, so it gradually develops to replace the artificial stone, become the most suitable material for making cabinets. Due to the hardness of quartzite itself, the finer the cut, the higher the requirement for craftsmanship.